← Blog
Hydrovac

Utility Daylighting in St. Louis: What It Is, When You Need It, and How It's Done

· 4 min read · By Kuesel

Short answer: Utility daylighting — also called potholing or test holing — means digging a small, controlled hole to expose a buried line and confirm its exact depth, size, material and position. It's usually done with hydro excavation and is the standard way to turn locate paint into verified data before design, boring or trenching.

Why locate marks aren't enough

811 marks show approximate horizontal location within a tolerance zone and say nothing reliable about depth. Lines drift, abandoned lines go unmarked, and private lines often aren't marked at all.

When projects need daylighting

  • Before directional boring at every crossing
  • During design, to collect Quality Level A data
  • Before foundations, poles or signs near marked lines
  • Where utilities conflict with new storm, sanitary or water lines
  • Brownfield and redevelopment sites
  • When owners or agencies require it

How it's done

  • 1) Call 811 (Missouri One Call System) at least two working days ahead.
  • 2) Plan holes at crossings and conflict points.
  • 3) Saw-cut or core pavement where needed.
  • 4) Hydro excavate — no metal touches the line.
  • 5) Record depth to top of pipe, size, material, offset; photograph each hole.
  • 6) Backfill and restore.

The deliverable is a log or marked-up plan designers and crews can trust.

Hydro vs. air excavation for daylighting

Both are non-destructive. Water cuts clay and frozen ground faster; air leaves dry spoil that can often be reused. Most St. Louis daylighting uses hydrovac because local clay responds well to water.

What drives cost

Number and depth of holes · pavement cutting and restoration · traffic control · slurry disposal distance · access and time windows. Grouping holes into one mobilization keeps costs down.

Choosing a daylighting contractor

Right truck size for your soil and depth, legal slurry disposal, documentation of every hole, and the ability to perform follow-on utility installation if conflicts turn up.

Need utilities verified before you bore or dig? Kuesel provides hydro excavation and utility daylighting across the St. Louis region, including St. Charles, St. Louis and Jefferson counties.

FAQ

Is daylighting the same as potholing?
Yes; daylighting, potholing, test holing and keyholing all describe exposing a buried utility to verify it.
How big is a daylighting hole?
Often about one foot square.
Does daylighting require a permit?
Right-of-way work usually needs a city, county or MoDOT permit; private-site work typically doesn't, but 811 notice is always required.
What is Quality Level A?
The highest level of subsurface utility data: the line is physically exposed and its horizontal and vertical position measured.

Send Kuesel your next site package.

Request a Bid
Call (636) 978-3478