# Lime Stabilization in St. Louis

> Lime stabilization of high-plasticity clay subgrade in St. Louis for building pads, pavement subgrade and wet clay that fails proof roll.

Canonical: https://kueselinc.com/services/soil-stabilization/lime
Last updated: 2026-11-09

Part of [soil stabilization](https://kueselinc.com/services/soil-stabilization).

Kuesel spreads quicklime dust-free from its own state-of-the-art spreader trucks and mixes it into clay subgrade with in-house crews and owned equipment on commercial and industrial sites in the St. Louis region, to the rate and depth set by the geotechnical engineer's mix design.

## When lime fits

Lime is generally used on high-plasticity clay, the kind of soil common around St. Louis that turns soft and sticky when wet. Typical uses:

- High-plasticity clay subgrade
- Wet clay that fails a [proof roll](https://kueselinc.com/services/proof-rolling)
- Building pads
- Pavement subgrade

## Why we work with quicklime

Kuesel primarily uses quicklime, which suits wet St. Louis clay. The engineer of record and the mix design set the agent.

## Modification vs. stabilization

Modification improves workability: the clay dries, its plasticity index drops and it can be graded and compacted, but it is not counted on for a structural value. Stabilization is designed to reach a strength value that the engineer uses in the pavement or slab design. The same lime can do either; the design intent, application rate and testing decide which one the spec is asking for.

## How we build it

1. Spread quicklime at the design rate, dust-free, from our own spreader trucks
2. Initial mix to depth
3. Mellowing period, when the spec calls for one
4. Final mix
5. Add water to the target moisture
6. Compact
7. Fine grade
8. Cure
9. The owner's testing agency tests the layer, and the subgrade is proof rolled

## Sulfate soils

Sulfate-bearing soils can heave when treated with calcium-based stabilizers such as lime, so soils are tested for sulfates when the specification calls for it.

## Weather limits

Most specifications restrict lime work in freezing temperatures and high wind, and require the treated layer to be protected while it cures. Timing depends on site conditions, temperature and the project specification.

## Dust control

Kuesel spreads lime and cement dust-free from its own state-of-the-art spreader trucks. We also follow the specification's wind limits, use water trucks, and mix the agent in promptly after it is spread. Occupied or sensitive sites get a spreading plan agreed with the GC in advance.

## Project proof

### Featured project: Tire plant Phase II, Clarksville, TN

On Phase II, Kuesel lime-stabilized 327,817 SY under the building pad, pavements, rail spur and laydown yards using about 10,300 tons of lime, at three different depths and rates on a pad with deep equipment pits cut inside it. [See the Clarksville tire plant project](https://kueselinc.com/projects/clarksville-tire-plant)

### Stabilization projects on the record

| Project | Client type | Location | Agent | Area / depth | Outcome |
| --- | --- | --- | --- | --- | --- |
| [Tire Plant Phase II](https://kueselinc.com/projects/clarksville-tire-plant) | Industrial (tire plant) | Clarksville, TN | Lime, about 10,300 tons | 327,817 SY — building pad 16" at 5%; pavements and rail spur 12" at 4%; laydown yards 12" at 3% | Building pad lime-stabilized at three different depths and rates, with deep equipment pits cut inside the pad. |
| [Retail Pavement Cement Stabilization](https://kueselinc.com/projects/alton-retail-cement-stabilization) | National retail store | Alton, IL (Madison County) | Portland cement at 7% | About 4,300 SY at a 12-inch depth | Subgrade treated in place instead of undercut, so paving could follow. |
| [University Track & Soccer Upgrade](https://kueselinc.com/projects/columbia-athletics-soil-stabilization) | University athletics | Columbia, MO | Portland cement | Stabilized to a 12-inch depth | Soil stabilization subcontractor with union labor; compaction by others. |
| West Plains Baseball/Softball Field (2024) | School athletics field | West Plains, MO | Quicklime at 2.5% | 11,235 SY at a 12-inch depth | Quicklime subgrade stabilization, spread, mixed and watered by Kuesel. |
| University City, MO cement-stabilized base (2023) | Available on request | University City, MO | Portland cement at 4% | 1,148 SY at a 12-inch depth (existing aggregate base) | Existing aggregate base cement-stabilized in place, with the subgrade restored to ±0.10 ft. |

More stabilization project references are available on request.

## Applications

- [Industrial & mission-critical pads](https://kueselinc.com/services/mission-critical) - Building pads and subgrade for industrial and mission-critical sites.
- [Commercial pads & parking lots](https://kueselinc.com/services/commercial-site-work) - Building pads and parking lot subgrade as part of a commercial site package.
- [Failed asphalt pavement](https://kueselinc.com/services/full-depth-reclamation) - Failed pavement and its base recycled in place with full-depth reclamation.
- [Failed proof roll](https://kueselinc.com/services/proof-rolling) - Soft subgrade that fails proof roll, treated in place where the engineer approves.

## Guides

- [Lime vs. Cement vs. Undercut](https://kueselinc.com/guides/lime-vs-cement-vs-undercut) - Plain-English comparison of subgrade fixes in Missouri, with a checklist for engineers.
- [Stabilizing Building Pads and Paving Subgrade on St. Louis Clay](https://kueselinc.com/guides/stabilizing-building-pads-and-paving-subgrade-st-louis-clay) - Why local clays and loess fail, how pad and pavement goals differ, and a checklist for GCs and developers.

## FAQ

### Does lime work on St. Louis clay?

Generally, yes. Lime is typically used on high-plasticity clay, which is common around St. Louis. The geotechnical report and lab mix design confirm whether lime suits a specific site and set the rate and depth.

### What is a mellowing period?

It is a wait between the initial and final mixing passes that some specifications call for, so the lime can work through the clay before the layer is finished. The specification sets whether one is required.

### Lime or cement for my subgrade?

As a general rule, lime is used on high-plasticity clays and cement on low-plasticity, silty or granular soils. Our [lime vs. cement vs. undercut guide](https://kueselinc.com/guides/lime-vs-cement-vs-undercut) covers the trade-offs. The engineer of record decides which agent a site gets.

### Does lime stabilization create dust?

It can, because lime is a fine powder. Kuesel spreads quicklime dust-free from its own state-of-the-art spreader trucks, and wind limits in the specification and prompt mixing add control.

### What do you need to bid lime stabilization?

Send the ITB, plans, geotech report, borings and PI data, specified depth and strength targets, and quantities through [Request a Bid](https://kueselinc.com/bid-invite).

## Request a bid

Send these and we can price it:

- ITB
- Plans
- Geotech report
- Borings and PI (plasticity index) data
- Specified depth and strength targets
- Quantities

[Request a Bid](https://kueselinc.com/bid-invite)

## Related

- [Soil stabilization](https://kueselinc.com/services/soil-stabilization)
- [Bid invite](https://kueselinc.com/bid-invite)
- [Request a bid](https://kueselinc.com/contact)
- [Request a bid](https://kueselinc.com/bid-invite)
- [Services](https://kueselinc.com/services)
- [Projects](https://kueselinc.com/projects)
