# Civil & Geotech Engineers: St. Louis Site Work | Kuesel

> Site contractor for St. Louis civil and geotech engineers: early stabilization vs. undercut budgets, spec constructability reviews, testing coordination.

Canonical: https://kueselinc.com/engineers
Last updated: 2026-11-16

Stabilization FAQs:

### What is soil stabilization?

Soil stabilization is mixing lime or cement into weak, wet or soft soil where it sits, so it becomes a firm, workable base for a building pad, road or parking lot instead of being dug out and replaced. A soil stabilization contractor spreads and mixes the stabilizer to the agent, rate and depth set by the geotechnical engineer's mix design, then compacts and grades it so paving or a slab can follow. Kuesel, a family-owned St. Louis site contractor in O'Fallon, MO since 1963, self-performs lime and cement stabilization, subgrade drying and base stabilization with in-house crews and owned equipment. Quality-control testing is done by the owner's testing agency.

### Lime vs. cement: which does my site need?

As a general guide, the Federal Highway Administration's [Geotechnical Aspects of Pavements manual (section 7.6)](https://www.fhwa.dot.gov/engineering/geotech/pubs/05037/07d.cfm) says lime should be considered for clay soils with a plasticity index above about 10 to 12, while cement is more commonly used on lower-plasticity soils. The final choice, application rate and depth come from laboratory mix design testing, described in [FHWA's mix design appendix](https://www.fhwa.dot.gov/engineering/geotech/pubs/05037/af.cfm). We follow the project engineer's or geotechnical engineer's mix design; we do not run the lab.

### What affects the cost of soil stabilization?

The main factors are the area to be treated, the treatment depth, the stabilizer type and application rate set by the mix design, how wet the soil is, site access, and the testing the specification requires. We price each job from the plans, geotech report and mix design, and can price an undercut alternate alongside it. Our guide to [soil stabilization cost factors](https://kueselinc.com/guides/soil-stabilization-cost-factors) covers each one.

### Can you stabilize soil in cold or wet weather?

Wet soil is one of the most common reasons to stabilize: lime and cement dry out soft, wet subgrade so grading and paving can continue instead of waiting for it to dry on its own. Cold weather is different. FHWA's [Soil and Base Stabilization manual (Volume II, mixture design)](https://www.fhwa.dot.gov/pavement/pubs/014732.pdf) advises that lime-cement stabilization should not be attempted when the soil temperature is below 40°F. Most specifications also restrict work in high wind and require the treated layer to be protected while it cures.

### Stabilize or undercut?

Where the engineer approves it, stabilizing soil in place avoids hauling soft soil off site and importing replacement fill, which cuts trucking and spoils. Undercut can still be the right call for deep soft zones or unsuitable fill. We price both so GCs and developers can compare them; our [lime vs. cement vs. undercut guide](https://kueselinc.com/guides/lime-vs-cement-vs-undercut) walks through the trade-offs, and the [stabilization vs. undercut tool](https://kueselinc.com/tools/stabilization-vs-undercut) compares cost, schedule and trucks for a specific site.

### What about dust?

Kuesel spreads lime and cement dust-free from its own state-of-the-art spreader trucks. We also follow the specification's wind limits, use water trucks, and mix the agent in promptly after it is spread. Occupied or sensitive sites get a spreading plan agreed with the GC in advance.

## Contact

|  |  |
| --- | --- |
| Phone | (636) 978-3478 |
| Address | 854 Lone Star Drive, O'Fallon, MO 63366 |
| Office hours | Monday–Friday 7:00 AM–4:00 PM |
| Service area | the St. Louis region |
| Bids | We confirm whether we're bidding within 1 business day. |

## Related

- [Soil stabilization](https://kueselinc.com/services/soil-stabilization)
- [Lime vs. cement vs. undercut guide](https://kueselinc.com/guides/lime-vs-cement-vs-undercut)
- [Request a bid](https://kueselinc.com/contact)
- [Request a bid](https://kueselinc.com/bid-invite)
- [Services](https://kueselinc.com/services)
- [Projects](https://kueselinc.com/projects)
